Barcode for SME Installation Instructions

From High5Wiki
Revision as of 18:27, 18 August 2011 by Amy (talk | contribs)
Jump to navigation Jump to search

SME Barcode Install

First:First
1. On the MT-2900 Scroll and Select Config...
2. Scroll to and Select Configure USB
3. Scroll to 'ActiveSync' and press ENT then Close
Second
1. Scroll to and Select Wireless Companion (Also inside Config)
2. If the Second to bottom item says 'Disable Radio' Scroll to it and press ENT
3. If Not Scroll to Exit Press ENT then Answer yes to the Pop-Up window.
Third
1. Plug the Device into your Computer using the USB cable that came with the Device.
2. You should see a window telling you you've plugged in a device (possibly installing drivers)
3. You should also be able to see the device in Windows Explorer under Computer.
Fourth
1. Double click on SMEBarcodeInstaller.msi
2. Follow the on Screen Prompts and select Default Directory when asked.
Fifth
1. Once the install process is finished on the device (You can squeeze the trigger to display the screen on the device pressing keys activates that key and could interrupt the install process)
2. Squeeze the Trigger and the '2' button together for at least 10 sec. The device screen will flash white then go black and then go white again at this point you can release the button and trigger.
3. This is called a Cold-Boot if the device ever starts to act funny you can perform this and it will return to normal.
4. Once the device boots you should see SME Barcode as the first item on the list.


Enabling wifi on the device:


On the MT-2900 Scroll and Select Config..
Scroll to and Select Wireless Companion
Select Find WLAN's scroll to the desired one and press ENT and select Connect.
Follow the wizard entering your information using the TAB key and Direction buttons. press the yellow button to enable/disable the letters on each number pad. (press the number -rapidly, multiple times to cycle through letters lowercase the upper)
When you get to the screen that says Profile Entry Encryption Type: tab to the check box saying "For added security - Mask Characters entered" Enable letters using the yellow button and press 0 This should unselect the check box.
Disable letters using the yellow key.
Press the blue key and then ESC until you are back to the Config screen
Once again select Wireless companion and Options
Cycle through the listbox until you get to Regulatory
TAB to Enable 802.11d and deselect this using same process as previously for check boxes.
TAB to Save and press ENT
Disable letters using the yellow button
Press the blue button and ESC
You should see signal bars in the top right of the screen
Once at the Config screen press 0 to return to the Home screen

WebService:


Lastly we need to Update your webservice so it provides the Barcode functionality.

You can download it here: http://high5software.com/mediawiki/index.php?title=CustomerPortal_and_TechPortal_Install_Guide
Follow the directions provided on the website. Once you pull up the webservice on your computer as described in the directions, click on Check DB connection if this functions normal you are good to go.
Once you have got this far Email me back and I will enable Barcode for you and provide you with access codes.

After this is complete please visit our wiki site on how to use the barcode device. http://high5software.com/mediawiki/index.php?title=Barcode_for_SME

Retrieved from "https://www.high5software.com//mediawiki/index.php?title=Barcode_for_SME_Installation_Instructions&oldid=1614"