Editing SQLink Client Setup

Use this for setting up SQLink on a client<br>

<br>High5 recommends that all users of QuickBooks running SQLink be mapped to the same drive letter. Typically this would be mapped as 'Q' for QuickBooks.
<br>1. Go to your SME shortcut. (Provided the user is already using SME. If not setup SME first.)
<br>2. Right click on the SME shortcut >''' Properties'''> '''Find Target'''. In other versions select 'Open File Location'.
<br>3. Locate the '''SQLink Documentation''' folder or the '''QBFC folder'''r in the root SME5 directory.  Early installations named the folder QBFC, later named it SQLink Documentation.
<br>4. Open the folder and run the '''QBFC11_Installer.exe'''. (If it's already been installed it will ask to Modify/Repair/Remove - select Modify.) 
<br><span style="color: rgb(227, 108, 10);">'''Note:'''</span> The QBFC program must be installed under the user's usual Windows login profile. Not under an Admin login profile.
<br><br>5. Then create a shortcut to the sqlink5.exe and place it on the client desktop.
<br><span style="color: rgb(227, 108, 10);">'''Important'''</span>: SQLink and QuickBooks must reference the same path to access the QuickBooks company file.
<br><br>7. In QuickBooks, press '''F2''' and check the path if it matches SQLink, (refer to the SQLink path instructions below.) When you press '''F2''' in QB, it opens the''' Product Information''' Screen. About a third of the way down on the left hand side is a field called '''File Information'''. This path should match for all workstations running SQLink. If it doesn't, go to File > Open or Restore and Open QuickBooks using the same path as the computer currently running SQLink.
 
<br>8. Launch SQLink and go to '''File'''> '''Link Setup'''
<br>9. Look at the '''QuickBooks Company File''' field in the '''QuickBooks Link''' section. <span style="color: rgb(227, 108, 10);">The paths must be the same. </span>
<br>[[File:QuickBooksCompanyFile_SQLInk.png]]
<br><br>If the paths are the same:
<br>* click cancel in SQLink.
<br>* Click '''Ok''' in QB. 
<br><br> If the paths are NOT the same:
<br>* You must either log out of QB and use the SQLink path 'or' set the QB path to match the path currently used to log into QB on the client.
<br>* Suggested method is to use a UNC path for both the server & the client or if all clients log in via a mapped drive then map the server with the same drive.